J100S
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-sized surge tanks, watering gardens, etc. These pumps should be installed in a covered area, protected against the weather. N.B. it is always advisable to install a foot valve or non-return valve or non-return valve on the suction opening.
PERFORMANCE RANGE
- Flow rate up to 60 L/min. (3.6 m^3/h)
- HEAD up to 45m
STANDARD DATA AND EQUIPMENT
Single phase 220V/50Hz. Brass impeller, carbon steel motor shaft, with thermal protector inside. Other model and material such as three phase, 110V, 60Hz, dual voltage, stainless shaft, etc, will be available upon request.
| POS. COMPONENT | CONSTRUCTION CHARACTERISTICS | |||||
|---|---|---|---|---|---|---|
| 1 PUMP BODY | Stainless steel, complete with threaded ports in compliance with ISO228/1 | |||||
| 2 BODY BACKPLATE | Stainless steel AISI 304 | |||||
| 3 NOZZLE ASSEMBLY | Noryl FE1520PW | |||||
| 4 IMPELLER | Stainless steel AISI 304 | |||||
| 5 MOTOR SHAFT | Stainless steel AISI 304 EN 10088-31.4104 | |||||
| 6 MECHANICAL SEAL | Pump | Seal | Shaft | Materials | ||
| Model | Model | Diameter | Stationary ring | Rotational ring | Elastomer | |
| J100S | AR-14 | 14 mm | Ceramic | Graphite | NBR | |
| 7 BEARINGS | 6203 ZZ/6203 ZZ | |||||
| 8 CAPACITOR | Pump | Capacitance | ||||
| Single-phase | (230 V or 240 V) | (230 V or 240 V) | ||||
| J100S | 20 uF 450 VL | 40 uF 300 VL | ||||
| 9 ELECTRIC MOTOR | JS: single-phase 230V – 50Hz with thermal overload protector built-in to the winding. | |||||
| JS: three-phase 230V – 50Hz | ||||||
| Pumps fitted with the three-phase motor option offer IE2 (IEC60034-30) class high performance | ||||||
| Stator and rotor are made out of magnetic sheet with low iron loss. | ||||||
| -Insulation:F class. | ||||||
| -Protection:IP 44. | ||||||
OPERATING LIMITS
- Suction lift up to 9 m
- Fluid temperature up to 60 C
- Maximum ambient temperature 40 C
TECHNICAL DATA
| TYPE | POWER KW HP | H MAX m | Q MAX L/min | SIZE Inch | S HEAD m | PACKING QTY |
|---|---|---|---|---|---|---|
| J100S | 0.75 1.0 | 45 | 60 | 1″ x 1″ | 8 | 1600 |
