There are just a few reasons that your water storage tank may be leaking. It could be as simple as a loose fixture in the entire system. The issue might also be improper drainage. Whatever the culprit of the leakage is, it can cause serious trouble in terms of your daily household chores and finances. So it is very critical to assess the situation once the problem arises and determine where exactly the leak may be coming from. How do you do this? Here are 5 things that you must check:
1. The tank’s inlet and outlet
These two, where pipes connect to your water tank, are often sources of leaks. You must check the intake and output connections to see if there is a problem. If there are any loose fittings, they may just need to be tightened with a pipe wrench.
2. The pressure relief valve
If you spot water leakage from a pressure relief valve (also known as T&P valve), either it is faulty or it is just performing its job by expelling water when the pressure builds up. This valve releases excess water as a precautionary measure if there is too much pressure in your tank. In this particular scenario, you have to take a look at the big picture of your system to determine why the valve is functioning overpressure to know the real problem.
3. The tank’s water pressure
You can use a pressure gauge to check the tank’s water pressure. Leakage usually happens when the exterior water supply is coming in at an excessive pressure for the tank. If the inbound pressure is too high, it means that the water pressure is not just causing a leakage. It may also be creating serious damage to the tank’s fixtures.
4. The bottom of the tank
Determining the source of a leak gets a bit tricky especially if water is collecting below the water storage tank itself. Leakage from a valve that runs down the sides of the unit might give you the impression that the leak is coming from the bottom. But if you will take a closer look, you’ll probably find out that the leak originates from the top or sides. If it is coming from the bottom, the tank itself is potentially cracked. In such a case, a unit replacement is needed.
5. The drain valve
A loose drain valve is one of the most common culprits of water tank leakage. Located towards the bottom of the tank, this must be completely closed. If water appears to be leaking from the valve, all you need to do is tighten it with a wrench until it is snug. Just be careful not to overdo it. If the leaking ensues, the washer inside is probably worn and needs replacement.
It wouldn’t hurt if you do some DIY troubleshooting once you’ve detected the leak. But having a professional from a trusted water tank installation company in the Philippines come in will always be the wisest solution. This will guarantee that you’ll keep potential long-term and expensive damage to your property at the bay. You might want to check out Firstank Philippines, a trusted provider of stainless-steel water storage tanks that provides a 6-month warranty for leaks under normal condition and offers free delivery within Metro Manila.
