Septic systems are essential for the disposal of domestic wastewater in areas where there is no access to a public sewer system. If you are using Fiberglass Reinforced Plastic (FRP) septic tanks in your home or office, it is very important to know the different types of septic systems for that specific unit. Doing so will allow you to decide which system is best for your property.
Here are five of the most common septic systems for FRP tanks:
1. Conventional Septic System
As the name suggests, this is the most common type of septic system used with FRP septic tanks. It consists of a septic tank that collects and treats wastewater from the household. The wastewater flows from the house to the septic tank, where it is treated and separated into three layers: scum, effluent, and sludge. The effluent is then discharged into a drain field, where it is further treated and filtered before being released into the soil.
2. Aerobic Septic System
This is quite similar to conventional septic systems, but it uses aerobic bacteria to treat the wastewater instead of anaerobic bacteria. The aerobic bacteria require oxygen to survive and are more efficient at breaking down organic matter. This results in a more thorough treatment of the wastewater, which makes it suitable for use in irrigation systems or for discharge into streams or lakes.
3. Mound Septic System
This system is usually used in areas with high water tables or poor soil conditions. It is also similar to the conventional one, but the effluent is discharged into a mound of sand and gravel instead of a drain field. The sand and gravel act as a filter, allowing the effluent to be absorbed by the soil without contaminating the groundwater.
4. Drip Irrigation Septic System
Drip irrigation septic systems are a type of aerobic septic system that uses a network of pipes and emitters to distribute the treated effluent into a drip irrigation system. The effluent is first treated in an FRP septic tank, then further treated in an aerobic treatment unit. The treated effluent is then distributed through the drip irrigation system, where it is used to water plants or crops.
5. Recirculating Sand Filter Septic System
This septic system uses sand filters to treat the effluent before it is discharged into a drain field. The effluent is first treated in an FRP septic tank, then pumped into a sand filter. The sand filter removes impurities from the effluent before it is recirculated back into the septic tank. This process is repeated several times to ensure that the effluent is thoroughly treated before it is discharged.
Bottomline
FRP septic tanks can be used with a variety of septic systems depending on the soil conditions, water table, and treatment requirements of the area. The conventional septic system is the most common type, but other septic systems are also available. It is essential to choose the right septic system for the specific needs of the area to ensure efficient and effective wastewater treatment. For expert guidance, you may reach Firstank PH at https://firstank.com/.
